A universal type seal comprising of an aluminium extrusion, silconized seals and s/s screws, for use also against dust and used to prevent banging of doors in hospitals etc.
For external and internal doors.

For doors opening inwards, comprising of one main bar screwed down under the door and the other bar to inside the door. Gives an excellent seal against rain and wind, a gap of a tight 38mm is required underneath the door (on the standard bar or similar design a gap of 30mm is required).

For inward opening doors, used in houses, schools, hospitals etc. This threshold has a new unique feature in its new snap off section which can be used in conjunction with a 14mm timber floor (see sketch). Meets requirements for wheelchair access. Aluminium profile section 15mm high. Gap under door 23mm. On some exposed sites we recommend using our "XL" Drip Set in conjunction with same, to give that extra protection against wind and rain. Tough siliconized top seal gives a long life to same.

Can be used in conjunction with our other bars or on its own. A heavy duty aluminium bar with rubber seal ans s/s screws which are then hidden by a cover strip. Gap under door 3mm up to 12mm. Used on all sorts of doors i.e. portacabins.

Used on metal, wooden & P.V.C. doors domestic and industrial. Aluminium extrusion with bristles, mill finish or anodized. 930mm or 2150mm lengths.

Manufactured from plastic moulding with bristles. Recommended for internal use.